-
Room Temperature Cure, filled epoxy system suitable for machine dispense. Developed for potting and casting of electrical and electronic components. The cured material exhibits excellent thermal cycling endurance. CLR 1556 / CLH 6640
-
Excellent heat dissipation, 125°C Operating. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6020
-
Long pot life, Excellent heat dissipation. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6025
-
Product is machine dispense friendly. A filled, high temperature operating, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive fillers and convenient mix ratio makes it suitable for processing in automatic dispense equipment. As part of an insulating system, it will meet class H, electrical temperature. This product meets UL94-V1 in house flammability testing. CLR 1820 / CLH 6440
-
UL 94-V1 Epoxy system for casting and potting electrical and electronic components, as part of an electrical insulating system it will meet Class H electrical temperature classification. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. CLR 1821 / CLH 6441
-
1:1 Mix Ratio, Fast Gel, Medium viscosity, Flameout, 180°C operating, Ballast potting. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio make it suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. CLR 1826 / CLH 6445
-
Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. A heat cure, low stress, extremely tough, epoxy casting compound. Product was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1831 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1836 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1837 / CLH 5185
-
Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631
-
Heat Cure, UV resistant, outdoor, low-stress, large mass casting epoxy system for instrument and power transformers. Extremely tough, epoxy compound. this system was specifically developed for use on outdoor instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 2161 / CLH 5100
-
A semi-flexible, 100% solid, epoxy system. This product was specifically developed for potting / casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes UL94-HB in-house flammability testing. For a more rigid system, CLR 3517 / CLH 6230 is recommended. CLR 3507 / CLH 6230
-
Room temperature cure, filled, semi-flexible epoxy system. Long pot life material is suitable for large mass casting or heat-induced curing with minimal stress. This product was specifically developed for potting / casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. For a softer system, CLR 3506 / CLH 6230 is recommended. CLR 3516 / CLH 6230
-
High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600
-
A low viscosity, single component, epoxy potting and encapsulating compound. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL 94-HB flammability requirements. Heat Cure Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. CLS 9611
-
Heat Cure. Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. Low viscosity. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL94-HB flammability requirements. CLS 9616
-
UL 94-V0 certified fast setting, potting / casting PU for transformers, coils, and electronic components. A two component, low viscosity, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. Product has excellent thermal shock resistance. XP 61862 / CLI 4161
-
High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015
-
1:1 Mix Ratio, 130°C Operating, General Purpose, Low cost. A two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. Its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets UL94-V0 in house flammability testing. XRD 1018 / XHD 1019
-
Room Temperature Cure Epoxy system suitable for potting and casting electrical / electronic components. 2:1 machine dispense friendly mix. Suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. XRD 1116 / XHD 1117