From Vacuum Pressure to Dipping to Overcoating We Have You Covered
Crosslink is a Canadian formulator with over 37 years of experience in the Motor repair, Generator and Transformer markets. We have field proven resin products for:
- High build VPI/dip applications
- Insulating epoxies with excellent core noise and vibration damping
- Epoxies designed for impregnating and insulating windings and stators
We have the products and experience to assist with your electrical, chemical and mechanical challenges. We offer quick turn arounds, reasonable MOQ’s, and if needed custom formulation services. If you cannot find what you are looking for in our below options, please Contact Us or Submit an Inquiry.
| * HC: Heat Cure / RT: Room Temperature Cure |
Handling |
|||||
|
Cure* |
Color |
Mix Ratio pbw |
Mixed Viscosity |
Gel Time |
Hardness |
|
| CLR1180 / CLH6520 |
RT |
Drk Amber |
100:100 |
750 |
2 Hrs. |
70D |
| Electronic potting, impregnating. / Benefits: Lowest viscosity semi-flexible convenient ratio. | ||||||
| CLR1556 / CLH6520 |
RT |
Black |
100:30 |
3,000 |
8 Hrs. |
55D |
| Transformer potting. / Benefits: 2:1 mix by vol. filled, good thermal cycling. | ||||||
| CLR3517 / CLH6230 |
RT |
Red |
100:10 |
3,250 |
90 min at 60oC. |
82D |
| Thermal cycle transformer casting. / Benefits: Semi-flexible, filled, good thermal cycling, casting. | ||||||
| CLR1876 / CLH6020 |
RT |
Black |
100:3 |
37,500 |
45 min. |
90D |
| Thermally conductive potting / cast. / Benefits: Thermally Conductive filled casting. | ||||||
| XR61406 / CLH6020 |
RT |
Grey |
100:12 |
2,000 |
45 min. |
70D |
| Low density potting / casting. / Benefits: Low Density casting 0.74 specific gravity. | ||||||
| CLR1946 / CLH6500 |
RT |
Black |
100:100 |
7,500 |
2.5 Hrs. |
65D |
| General purpose potting, casting. / Benefits: Convenient mix, economical, filled, casting. | ||||||
| XRD1018 / XHD1019 |
RT |
Black |
100:100 |
7,500 |
75 min. |
65D |
| General purpose flame out pot/cast. / Benefits: Easy mix, economical, filled, meets UL94-V0. | ||||||
| XRD1116 / XHD1117 |
RT |
Grey |
100:50 |
9,000 |
25 min. |
87D |
| Small motor and ballast potting. Benefits: Ballast potting, passes UL 94-V1. | ||||||
| CLR1821 / CLH6441 |
RT |
Grey |
100:100 |
20,000 |
45 min. |
87D |
| UL listed electronic potting casting. / Benefits: UL 94-V1 Yellow card, potting and casting. | ||||||
| CLR1331 / CLH6010 |
RT |
Grey |
100:7.5 |
4,500 at 70oC. |
6 min. at 70oC. |
91D |
| Electrical insulator casting. / Benefits: Casting low voltage bushings and insulators. | ||||||
| XR52092 / XH62093 |
RT |
Grey |
100:100 |
35,000 |
35 min. |
85D |
| Thixotropic epoxy sealant. / Benefits: Sealing ends of large electrical laminations. | ||||||
| CLR1837 / CLH5185 |
HC |
Red |
100:30 |
6,000 at 60oC. |
30 min. at 125oC. |
90D |
| Electrical insulator casting. / Benefits: Cast lg bushings, insulators and power transformers. | ||||||
| CLR1329 / CLH5100 |
HC |
Grey |
100:23 |
500 at 60oC. |
24 min. at 100oC. |
90D |
| Outdoor electrical casting. / Benefits: Outdoor heat cure large mass casting. | ||||||
| CLR1190 / CLH5185 |
HC |
Amber |
100:100 |
2,000 |
45 min. at 125oC. |
86D |
| Dipping / impregnating system. / Benefits: 155oc. operating low stress impregnating. | ||||||
| CLR1157 / CLH5185 |
HC |
Red |
100:30 |
1,500 at 50oC. |
40 min. at 125oC. |
88D |
| Transformer potting / casting. / Benefits: 155oC. operating low stress, tough, filled. | ||||||
| CLR1331 / CLH5185 |
HC |
Grey |
100:30 |
2,000 at 60oC. |
30 min. at 125oC. |
90D |
| Transformer potting / casting. / Benefits: 155oC. low stress, semi-rigid filled. | ||||||
| CLR1190 / CLH5515 |
HC |
Amber |
100:150 |
2,250 at 60oC. |
2 hrs. at 100oC. |
70D |
| Dipping / impregnating system. / Benefits: 155oC. operating increase flexibility over CLH 5185. | ||||||
| CLR1157 / CLH5515 |
HC |
Red |
100:50 |
2,250 at 65oC. |
40 min. at 125oC. |
70D |
| Transformer potting / casting. / Benefits: 155oC. operating increase flexibility over CLH 5185. | ||||||
| CLR1331 / CLH5515 |
HC |
Grey |
100:50 |
4,000 at 65oC. |
40 min. at 125oC. |
82D |
| Transformer potting / casting. / Benefits: 180oc. operating increased flexibilty over CLH 5185. | ||||||
| CLR1190 / CLH5166 |
HC |
Amber |
100:80 |
650 |
2 hrs. at 100oC. |
85D |
| Dipping / impregnating system. / Benefits: 180oc. operating dipping, coil impregnation. | ||||||
| CLS 9600 |
HC |
Drk Amber |
*** |
1,100 |
25 min. at 125oC. |
85D |
| Dipping / impregnating one comp. / Benefits: 220oC. operating one component coil impregnation. | ||||||
| CLS 9616 |
HC |
Black |
*** |
16,000 |
90 min. at 100oC. |
70D |
| Low stress ferrite potting one comp. / Benefits: 155oC. operating low stress, ferrite potting. | ||||||
Featured Urethane Systems
| * HC: Heat Cure / RT: Room Temperature Cure |
Handling |
|||||
|
Cure* |
Color |
Mix Ratio pbw |
Mixed Viscosity |
Gel Time |
Hardness |
|
| CLR1180 / CLH6520 |
RT |
Black |
100:16 |
4,000 |
1 Hr. |
60 D |
| Transformer potting / casting / Benefits: General purpose, economical, passes UL 94-V0. | ||||||
| XPD1278 / CLI4161 |
RT |
Black |
100:20 |
4,000 |
9 min. |
48 D |
| Electronic potting / casting / Benefits: Economical fast setting | ||||||
| CLP7106 / CLI4010 |
RT |
Black |
100:109 |
4,000 |
20 min. |
90 A |
| UL 94-V0 motor and electronic pot / Benefits: UL 94-V0 Yellow card, 1:1 pbv mix | ||||||