CLR 1180 / CLH 6020

A low viscosity, two component, unfilled, room temperature cure, epoxy system. This system provides resiliency and strength making it suitable for a variety of applications. ie. adhesives, castings, coatings and tooling. CLR 1180 / CLH 6020

CLR 1180 / CLH 6560

Room temp cure, Excellent shock resistance. An exceptional epoxy casting system with excellent thermal and mechanical shock resistance. CLR 1180 / CLH 6560

CLR 1180 / CLH 6930

Room temp cure, excellent shock resistance. An exceptional epoxy laminating system with excellent thermal and mechanical shock resistance. Product is suitable for a variety of applications. CLR 1180 / CLH 6930

CLR 1183 / CLH 6560

Shock resistant, General purpose epoxy. A two component epoxy casting system. product has low shrinkage and excellent shock resistance. CLR 1183 / CLH 6560

CLR 1190 / CLH 5166

Very long pot life (4-5 days) at room temperature, low viscosity, impregnating, 180°C operating. A two component, heat cured, long pot life, epoxy impregnating compound. This product was specifically developed for coils and transformers. CLR 1190 / CLH 5166

CLR 1190 / CLH 6020

R.T. Cure. 105°C operating. Small coils & Transformers, Electronics, Resistant to fuels. A 100% solids epoxy which is recommended for potting and casting transformers, coils and other components. It cures quickly at low temperatures and is resistant to gasoline and other solvents. CLR 1190 / CLH 6020

CLR 1190 / CLH 6025

General purpose variable substrate adhesive. A medium viscosity, unfilled casting system. It is suitable for large mass castings and exhibits good impact resistance. CLR 1190 / CLH 6025

CLR 1190 / CLH 6372

Solvent resistant. Good Adhesive. A room temperature cure casting system with excellent chemical resistance. When properly post cured, the product is suited for operation at elevated temperatures. CLR 1190 / CLH 6372

CLR 1190 / CLH 6560

Low viscosity, RT cure. Impact resistant. Excellent thermal cycle. An exceptionally tough epoxy casting system with excellent low temperature thermal and mechanical shock resistance. CLR 1190 / CLH 6560

CLR 1321 / CLH 5100

General Purpose Aluminum. An aluminum filled, low viscosity, room temperature gelling, casting system. The product has excellent surface reproduction, and high strength. This system is recommended for use with aluminum shot for large mass casting. CLR 1321 / CLH 5100

CLR 1331 / CLH 5515

Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1331 / CLH 5515

CLR 1336 / CLH 5515

Heat Cure Epoxy System formulated for instrument and power transformers. Cured epoxy exhibits excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1336 / CLH 5515

CLR 1337 / CLH 5515

Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1337 / CLH 5515

CLR 1376 / CLH 6930

130°C Operating. Low Exotherm, low shrinkage, excellent shock resistance. A two component epoxy which is recommended for potting and casting transformers, coils and other electronic components. The system provides a good pot life with low exotherm and shrinkage. Cured material has excellent thermal shock resistance. CLR 1376 / CLH 6930

CLR 1476 / CLH 6730

Low viscosity epoxy, Suitable for machine dispense, Pot / Cast electronic switches. A low viscosity, general purpose, room temperature curing, epoxy encapsulant. Product is filled with non-abrasive fillers suitable for machine dispensing. Product has good physical, thermal and electrical properties. CLR 1476 / CLH 6730

CLR 1556 / CLH 6640

Room Temperature Cure, filled epoxy system suitable for machine dispense. Developed for potting and casting of electrical and electronic components. The cured material exhibits excellent thermal cycling endurance. CLR 1556 / CLH 6640

CLR 1566 / CLH 6020

Excellent heat dissipation, 125°C Operating. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6020

CLR 1566 / CLH 6025

Long pot life, Excellent heat dissipation. A thermally conductive two part epoxy system. The system was specifically designed for applications where heat dissipation on thermally sensitive devices is required. CLR 1566 / CLH 6025

CLR 1820 / CLH 6440

Product is machine dispense friendly. A filled, high temperature operating, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive fillers and convenient mix ratio makes it suitable for processing in automatic dispense equipment. As part of an insulating system, it will meet class H, electrical temperature. This product meets UL94-V1 in house flammability testing. CLR 1820 / CLH 6440

CLR 1821 / CLH 6441

UL 94-V1 Epoxy system for casting and potting electrical and electronic components, as part of an electrical insulating system it will meet Class H electrical temperature classification. A filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. CLR 1821 / CLH 6441