Crosslink Technology Inc. manufactures many different types of components to customer design.
Most of these components are considered "Proprietary" and are not referenced on our web site.
Custom components involve specialty tooling and can be electrical or mechanical devices. Our formulating capabilities and knowledge of various applications allows us to select the correct compounds to meet specific performance criteria. Depending on the component being considered, our ability to develop Epoxy and Polyurethane tooling can also provide cost savings.
Our minimum is $1,000.00 per order.
The price per component, however, will vary based on the quantity. The higher the quantity the lower the price per part.
All components manufactured by Crosslink Technology Inc. are subject to quality control. Components from all production batches are sampled and thoroughly tested for the accuracy of dimensions and critical physical properties. Incoming raw materials are subject to approval prior to use in production.
The quality control system is certified under the latest ISO 9001:2015 requirements and incorporates all customer specified critical criteria in addition to our standard quality procedures.
The minimum order quantity for off the shelf standard components is only limited by our minimum invoice amount of $1,000.00 per invoice.
Custom cast specialty components usually involve development work, mould design, mould construction etc. Although these tasks can be accomplished rather quickly, at times using epoxy tooling, there is usually a fair amount of effort required to manufacture the custom components. The minimum order size will depend on the complexity of the part, the processing time involved and the delivery requirements. Each custom project is quoted separately.
Crosslink Technology Inc. maintains stock of components that meet the most common electrical requirements. The lead time to ship these components ranges from one day to 3 days. Specialty components, or if the parts are not in stock, the lead time to ship is 3 - 4 weeks from receipt of order.
Specialty components that require tooling alterations will take longer depending on complexity. Since we are also formulators of Epoxy and Polyurethane compounds, we often are able to produce epoxy tooling to accommodate shorter production runs.
We are able to cast just about any type of component utilizing our own formulations. We have, at any given time, several non-electrical components being manufactured in our plant. Since we are also epoxy and polyurethane formulators, we are able to develop the correct material for the application at hand. We can easily make prototype tooling utilizing one of our epoxy or polyurethane tooling products. We often manufacture prototype castings and subsequently supply our customers with the correct formulation and instructions on how best to manufacture their component in their facilities.