CLR 1180 / CLH 6520

Flexible epoxy casting and potting system. An unfilled, semi-flexible epoxy casting system with long pot life. This product may be used in large mass casting. CLR 1180 / CLH 6520

CLR 1180 / CLH 6560

Room temp cure, Excellent shock resistance. An exceptional epoxy casting system with excellent thermal and mechanical shock resistance. CLR 1180 / CLH 6560

CLR 1183 / CLH 6560

Shock resistant, General purpose epoxy. A two component epoxy casting system. product has low shrinkage and excellent shock resistance. CLR 1183 / CLH 6560

CLR 1321 / CLH 5100

General Purpose Aluminum. An aluminum filled, low viscosity, room temperature gelling, casting system. The product has excellent surface reproduction, and high strength. This system is recommended for use with aluminum shot for large mass casting. CLR 1321 / CLH 5100

CLR 1331 / CLH 5515

Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1331 / CLH 5515

CLR 1336 / CLH 5515

Heat Cure Epoxy System formulated for instrument and power transformers. Cured epoxy exhibits excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1336 / CLH 5515

CLR 1337 / CLH 5515

Cured epoxy exhibits excellent thermal stability and thermal cycling performance. A two component, heat cured epoxy system, developed specifically for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling performance. Product meets UL94-HB flammability requirements. CLR 1337 / CLH 5515

CLR 1876 / CLH 6631

Heat Cure low-stress, extremely tough, epoxy casting system casting system for large bushings, insulators, power and instrument transformers. Higher heat deflection temperature when compared to CLR 1331 / CLH 5515 family. Machine dispense friendly with excellent thermal stability and thermal cycling performance. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets UL94-HB flammability requirements. CLR 1876 / CLH 6631

XID 1681 / XHD 1652

A two component polyurethane casting system. Product has long pot-life and cures to a hardness of 65 Shore D. XID 1681 / XHD 1652

XRD 1321 / CLH 5185

Machine dispense friendly, tough, casting epoxy system. Increased flexibility when compared to CLR 1831 family. A two component, low stress, heat cure epoxy system specifically developed for use on instrument and power transformers. The product if filled with non-abrasive fillers, making the product suitable for machine dispensing. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. XRD 1321 / CLH 5185

XRD 1501 / CLH 6090

4:1 Ratio, soft system. A two component unfilled, flexible epoxy system. Product features low viscosity, long pot life and cures to a shore hardness of 70A. XRD 1501 / CLH 6090