Follow Us on LinkedIn Follow Us on YouTube

  1. CLR 1415 / CLH 6220

    Low Density, Flame Retardant, 120°C Operating. A two component, low density, room temperature curing, flame retardant, epoxy potting/casting compound. CLR 1415 / CLH 6220

  2. CLR 1510 / CLH 6580

    Low viscosity, RT cure. Excellent thermal shock resistance. A low viscosity adhesive with excellent thermal and mechanical shock resistance. CLR 1510 / CLH 6580

  3. CLR 1583 / CLH 6229

    Excellent for potting thermostats and sensors. A two component, room temperature cure, potting and encapsulating epoxy system. Material contains non-abrasive fillers suitable for machine dispense. CLR 1583 / CLH 6229

  4. CLR 1710 / CLH 6710

    Abrasion Resistant Epoxy. An abrasion resistant, two component epoxy surface coat. CLR 1710 / CLH 6710

  5. CLR 1730 / CLH 6372

    Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372

  6. CLR 1796 / CLH 6580

    UL 94-V0 system for potting and casting small electronic parts that require thermal shock and thermal cycling performance. A two component, low viscosity, room temperature cure epoxy system. Material has yellow card UL94-V0 rating, and contains non abrasive fillers suitable for meter mix dispense. CLR 1796 / CLH 6580

  7. CLR 1946 / CLH 6500

    Product is recommended for potting and encapsulating applications. A two component, room temperature cure semi-flexible epoxy system. The system was developed for potting / casting of electrical and electronic components. Its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment. CLR 1946 / CLH 6500

  8. CLR 3080 / CLH 6372

    General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372

  9. CLS 9420

    Structural Adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. A single component structural adhesive. This compound gels quickly at elevated temperatures with excellent adhesion to most substrates. CLS 9420

  10. XR 11483 / CLH 6260

    Excellent fuel resistance. Suitable for automotive fuel sensors. A two component, chemical resistant epoxy casting system. The cured product has improved thermal conductivity for applications where heat dissipation from thermally sensitive devices is required. Cured product is resistant to Ethanol, Gasoline, and Diesel, when exposed to these chemicals at ambient or elevated temperatures. XR 11483 / CLH 6260

  11. XR 52092 / XH 62093

    1:1 machine dispense adhesive. Adhesive for bonding synthetic aggregates to metal. A medium viscosity, room temperature curing, two component epoxy adhesive. Product was developed with improved thin film set time when bonding metal substrates. XR 52092 / XH 62093

  12. XRD 1014 / XHD 1015

    High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015

  13. XRD 1018 / XHD 1019

    1:1 Mix Ratio, 130°C Operating, General Purpose, Low cost. A two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. Its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets UL94-V0 in house flammability testing. XRD 1018 / XHD 1019

  14. XRD 1116 / XHD 1117

    Room Temperature Cure Epoxy system suitable for potting and casting electrical / electronic components. 2:1 machine dispense friendly mix. Suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. XRD 1116 / XHD 1117

  15. XRD 1116 / XHD 1158

    2:1 machine dispense friendly mix. A filled, room temperature cure, two component epoxy system. The product is suitable for potting / encapsulating electrical and electronic components. The use of non-abrasive fillers and the convenient mix ratio makes it suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. XRD 1116 / XHD 1158

  16. XRD 1116 / XHD 1281

    Room temperature cure epoxy system suitable for potting and casting electrical / electronic components. 2:1 machine dispense friendly mix. The product is suitable for potting/encapsulating electrical and electronic components. The use of non-abrasive fillers and the convenient mix ratio makes it suitable for processing in automatic dispense equipment. This product meets UL94-V1 in house flammability testing. XRD 1116 / XHD 1281

  17. XRD 1575 / XH 61418

    2:1 machine dispense adhesive. Bonding abrasive wheels and disks. A two component epoxy system suitable for potting, casting and adhesive applications. Product gels quickly and has good thermal cycling endurance. Material is filled with non-abrasive fillers making it suitable for machine dispensing. XRD 1575 / XH6 1418

Results 21 - 37 of 37

Filters