Follow Us on LinkedIn Follow Us on YouTube

  1. CLR 1180 / CLH 6020

    A low viscosity, two component, unfilled, room temperature cure, epoxy system. This system provides resiliency and strength making it suitable for a variety of applications. ie. adhesives, castings, coatings and tooling. CLR 1180 / CLH 6020

  2. CLR 1180 / CLH 6520

    Flexible epoxy casting and potting system. An unfilled, semi-flexible epoxy casting system with long pot life. This product may be used in large mass casting. CLR 1180 / CLH 6520

  3. CLR 1180 / CLH 6560

    Room temp cure, Excellent shock resistance. An exceptional epoxy casting system with excellent thermal and mechanical shock resistance. CLR 1180 / CLH 6560

  4. CLR 1180 / CLH 6770

    A two component, unfilled, room temperature cure epoxy, for coating, casting, and adhesive applications. CLR 1180 / CLH 6770

  5. CLR 1180 / CLH 6930

    Room temp cure, excellent shock resistance. An exceptional epoxy laminating system with excellent thermal and mechanical shock resistance. Product is suitable for a variety of applications. CLR 1180 / CLH 6930

  6. CLR 1183 / CLH 6560

    Shock resistant, General purpose epoxy. A two component epoxy casting system. product has low shrinkage and excellent shock resistance. CLR 1183 / CLH 6560

  7. CLR 1190 / CLH 6560

    Low viscosity, RT cure. Impact resistant. Excellent thermal cycle. An exceptionally tough epoxy casting system with excellent low temperature thermal and mechanical shock resistance. CLR 1190 / CLH 6560

  8. CLR 1625 / CLH 6330

    General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Its low viscosity gives the system excellent wet -out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. For a faster system use hardener CLH 6333. CLR 1625 / CLH 6330

  9. CLR 1625 / CLH 6333

    General Purpose Epoxy. An unfilled, room temperature cure, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material will also saturate wood readily. CLR 1625 / CLH 6333

  10. CLR 1730 / CLH 6372

    Heat and chemical/fuel resistant adhesive/laminating. A two component heat and chemical resistant epoxy laminating system. CLR 1730 / CLH 6372

  11. CLR 3080 / CLH 6372

    General Adhesive room temperature cure. Resistant to Toluene, Ethanol, Aviation Gas and Diesel Fuel. A low viscosity, two component, chemical resistant epoxy system. Post cured material has excellent resistance to most petroleum based fuels and solvents during exposure at ambient and elevated temperatures. CLR 3080 / CLH 6372

  12. CLS 9600

    High Temperature. A single component, 100% solids, low viscosity, impregnating compound for coils and transformers. This product is also suitable for sand casting. CLS 9600

  13. XRD 1014 / XHD 1015

    High temperature clear epoxy. An unfilled, heat resistant, clear laminating system. Products low viscosity gives the system excellent wet-out properties to fibreglass and other reinforcing fibres. The material exhibits high physical strengths and modulus with moderate post cure temperatures. XRD 1014 / XHD 1015

  14. XRD 1347 / XHD 1348

    The product cures to a shore hardness of 50 A, low viscosity, soft system. A two component, very flexible epoxy system. XRD 1347 / XHD 1348

  15. XRD 1501 / CLH 6090

    4:1 Ratio, soft system. A two component unfilled, flexible epoxy system. Product features low viscosity, long pot life and cures to a shore hardness of 70A. XRD 1501 / CLH 6090

Results 1 - 15 of 15

Filters