 |
EPOXY
AND URETHANE TOOLING COMPOUNDS
" Solutions that add value instead of just cost "
|
Epoxy and Polyurethane Tooling, Laminating
and Surface Coat Products
Epoxy and Polyurethane
tooling compounds are formulated for improved heat transfer and are
specifically
suited to limited production quantities
where the cost of permanent steel tooling can not be justified.
In some cases, old or damaged parts can be
repaired and used as
"masters" to make tooling for the production of
new, defect free components.
Tooling can be manufactured utilizing aluminum or sealed wooden
masters at considerably lower cost than having the complete tool made out of
steel. Replacing worn tools is quick and easy.
Benefits:
- >High temperature operation
capability.
- >Low cost
compared to steel or aluminum.
- >Exceptional detail
reproduction.
- >Many
products are machine able.
Selection:
| All data sheets are in PDF format. Click the
image if you do not have the software>>>
|
 |
Below is a list of our most popular products. Special requests are
welcome!
Back to Top
Could not find what you need?
Search our Epoxy and Urethane database
by specifying basic handling
parameters
Specify your requirements for an Epoxy or Urethane
and let us recommend
products
based on the handling and performance properties you specify.
Epoxy and urethane products are
widely used to manufacture prototype tooling. In many cases prototype
tooling can also accommodate short production runs. The following are
useful reference web sites:
Engineer's Handbook to provide design information for epoxy and
urethane type materials and tooling.
World Wide Guide to Rapid Prototyping includes information on epoxy
tooling.
| 
