|
| |
HIGHLIGHTED Epoxy and Urethane PRODUCTS
FOR SPECIFIC APPLICATIONS
The following products have been found successful in the listed
applications. Generally speaking, Epoxies and Polyurethanes are versatile
products and may be used in a variety of different applications. For example: a
potting compound may be used as an adhesive and certain adhesives may be used as
potting compounds. The limiting factors in choosing suitable materials are the
handling, processing and cured properties desired.
NOTE:
Clicking on any of the underlined product numbers will
display the technical data sheet for viewing or printing. For those numbers that
are not underlined or to obtain additional information please submit the form
via the link at the bottom of this page.
The following are highlighted products:
| PRODUCT |
APPLICATION |
BENEFITS |
|
CLR 1185/CLH 6372 |
General Bonding. |
Resistant to
Toluene, gasoline, ethanol, methanol, aviation gas and diesel fuel. |
| Has been used
successfully to bond fibreglass components for underground gasoline
overflow containment tanks. |
| Room temperature
cure. |
|
CLR 1190/CLH 6560 |
Golf club
shaft bonding and face casting. |
Excellent impact
resistance |
| Strong bond. |
| Room temperature cure. |
|
CLC 16-600 |
Quick set
adhesive |
Clear, light, THIXOTROPIC
(non-sag) paste. |
| 5 minute set at Room
Temperature. |
|
CLR 1390/CLH 6228 |
General Purpose |
Paste, Cures at Room Temperature. |
| 2:1 by volume mix ratio. |
| Good for bonding a variety of substrates. |
Back to Top
| PRODUCT |
APPLICATION |
BENEFITS |
|
CLR 1946/CLH 6500 |
General Purpose Epoxy |
Economical. |
| Easy, 1:1 mix ratio. |
| 1 Hr pot life with 2-3 Hr gel time at Room
Temperature. |
| 24 Hr cure at Room Temperature. |
|
CLR 1556/CLH 6510 |
Epoxy for
potting Electronic Modules. |
Good adhesion to most
substrates. |
| Cures to shore 40-50D.
Inherent flexibility results in low stress. |
| Long, 6-10 Hr pot life. |
|
CLR 1556/CLH 6640 |
Epoxy for Electronic Modules. |
Successful on instrument transformers. |
| Possible to pot, test and ship units within
6 Hrs. |
| 2,000-4,000 cps viscosity allows for good
penetration. |
| Excellent for encapsulating PC boards. |
|
CLR 1826/CLH 6441 |
Epoxy for
potting ballast transformers. |
Meets
UL94 V1 |
| Excellent for high volume
production with 25-50 minute gel time. |
| Class H operating
temperature capability. |
| Machine dispensable with
a convenient 1:1 mix ratio. |
|
CLP 7806/CLI 4161 |
Polyurethane for potting
electronics or transformers. |
Meets UL94 VO |
| Has been used to pot battery packs and
smoke detectors. |
| The urethane chemistry yields excellent
shock resistance. |
|
CLR 1796/CLH 6580 |
Epoxy for
potting small modules. |
UL94VO
Yellow Card. |
| Tough and resilient. |
| 1 Hr gel at Room
Temperature. |
Back to Top
| PRODUCT |
APPLICATION |
BENEFITS |
|
CLP 7469/CLI 4161 |
Urethane Casting Potting for
Transformers. |
Tough, resilient Polyurethane. |
| No significant core pinch. |
| Successful on small metering transformers. |
|
CLR 1556/CLH 6640 |
Epoxy
Casting/Potting System. |
Excellent thermal
cycling. 35% elongation. |
| Suited for high volume
production. |
| 2,000 - 4,000 mixed
viscosity allows for excellent penetration. |
|
CLC 15-150 A/B |
Epoxy Casting/Potting System. |
Tough, high elongation combined with
excellent tensile strength. |
| Extremely crack resistant. |
| Suitable for large mass castings. (Have
been cast 400# plus) |
|
CLR 1837/CLH 5185 |
Epoxy
Casting/Potting System. |
Extremely tough. |
| Excellent thermal
stability. |
| Excellent for large mass
castings. Low mixed viscosity when heated. |
|
CLR 1838/CLH 5185 |
Epoxy Casting/Potting System. |
Same as above and
meets UL94V0. |
| Improved Arc Track Resistance. |
|
CLR 2161/CLH 5100 |
Epoxy
Casting/Potting System for Outdoor use. |
Cycloalliphatic
chemistry. |
| Excellent for outdoor
use. |
| Excellent UV resistance. |
|
CLS 9600 |
Epoxy Coil Impregnating
Compound. |
Single component, varnish type epoxy. |
| Relative Thermal Index of 2200C |
| Cure is 4 Hrs at 1250C |
|
CLS 9608 |
Epoxy Dipping
Compound. |
5-10 mil build depending
on coil design. |
| Compatible with
insulation materials. |
| Minimal drip on flat
surfaces. |
| Cure is 4 Hrs at 1250C |
Back to Top
| XSD 1159 |
Thin film sealing |
Moisture cured, silicone modified, HMWP
sealant. |
| Tack free in 30 Minutes. |
| Cure depth of 1/8" in one Day and 1/3" in 7
Days. |
| Soft, 15-20A hardness. |
| Operates up to 900C |
| Printable with most waterborne finishes. |
|
CLR1396/CLH6930 |
Porous metal
surfaces |
Fast setting at elevated
temperatures. |
| Leak sealing steel
automotive wheels. |
|
CLS 4950 |
Polyurethane
PC board coating. |
Moisture cure
Polyurethane. |
| Sprayable or may be used
to dip coat. |
Back to Top
| PRODUCT |
APPLICATION |
BENEFITS |
|
CLR1299/XHD 1303 |
Casting/Vacuum Forming Epoxy
Compound |
Aluminium filled. |
| Castable up to 2" depth. |
| Room Temperature gel. |
| Could be used without post cure. |
|
CLR 1299/CLH 6330 |
Casting/Vacuum Forming Epoxy Compound |
Aluminium filled. |
| Castable up to 1" depth. |
| Room Temperature gel. |
|
CLC 16-852 A/B |
Casting/Vacuum Forming Epoxy
Compound |
Aluminium filled. |
| Castable up to 4" in depth. |
| Long pot life and low shrinkage. |
| Could be cured 2 Hrs at 600C |
|
CLI 4175/CLH 6292 |
Polyurethane
Casting Compound for Large mass castings |
Room Temperature cure. |
| Very low shrinkage. |
| Outstanding tear strength
and abrasion resistance. |
| Can be used for tools,
foundry patterns and die fabrications. |
|
CLR 1299/XHD 1326 |
Casting/Vacuum Forming Epoxy Compound |
Castable up to 50 Lbs (23
kgs). |
| Low exotherm, long pot
life. |
| Heat cure required. |
| 1500C
operating. |
Back to Top
| PRODUCT |
APPLICATION |
BENEFITS |
|
XRD 1014/XHD 1015 |
Epoxy Laminating. |
Low viscosity. |
| Excellent wet-out on Fibreglass and other
fibres. |
| High strength and modulus with moderate
post cure. |
| Unfilled, clear system. |
|
CLR 1292/CLH 6040 |
Epoxy
Laminating/Surface Coat. |
Excellent detail
reproduction. |
| Can be filled with
Aluminium for larger masses. |
| Operates up to 1500C. |
|
CLR 1625/CLH 6024 |
Epoxy Laminating. |
Unfilled. |
| Room Temperature cure. |
| Readily saturates wood. Excellent wetting
properties. |
|
CLR 1625/CLH 6330 |
Epoxy,
General Purpose Laminating. |
Unfilled, Low viscosity. |
| Room Temperature cure. |
| For faster system use CLH
6333 hardener. |
|
CLR 1730/CLH 6040 |
High Temperature Epoxy
Laminating. |
1500C Operating. |
| Suitable for multi stage lay-up and vacuum
bagging. |
| Long working time in thin layers. |
| Post cure required 2 Hrs @ 1000C
+ 2 Hrs @ 1250C |
Back to Top
| PRODUCT |
APPLICATION |
BENEFITS |
|
CLR 1635/CLH 6027 |
General Purpose Epoxy Surface
Coat |
White surface coat. |
| Can be brushed or applied using a spatula. |
| Room Temperature cure. |
|
CLR 1297/CLH 6040 |
Epoxy, Heat
Resistant Surface Coat. |
Operates up to 1500C |
| Aluminium filled. |
| Very tough and
dimensionally stable. |
|
CLI 4175/CLH 6104 |
Polyurethane Surface Coat. |
Room Temperature cure. |
| Outstanding tear strength and abrasion
resistance. |
| Can be used for tools, foundry patterns and
core boxes. |
| Contains no MOCA or MDA |
Back to Top
| PRODUCT |
APPLICATION |
BENEFITS: |
|
XPD 1070/CLI 4161 |
Tip casting |
Fast, 6 minute pot life and 9 minute gel
time. |
| Low, 500 cps viscosity for good
penetration. |
| Cures to 65-70D hardness. |
| Excellent for canoe paddle tips. |
|
XPD 1082/CLI 4181 |
Tip casting |
Fast, 8-10 minute gel
time. |
| Low, 500 cps viscosity. |
| Cures to 65-70D hardness. |
| Better abrasion
resistance. |
|
XPD 1101/CLI 4181 |
Tip casting |
Fast, 8-10 minute gel time. |
| Cures to 70-75D hardness. |
| Best urethane for canoe paddles. |
Back to Top
| PRODUCT |
APPLICATION |
BENEFITS: |
|
CLA 8000 |
Release agent |
Many years of proven performance. |
| Suitable for use on metals or plastic
parts. |
| Will withstand high temperature. |
| May be applied by brush or spray. |
Back to Top
NOTE:
Most of the products listed in the
tables above have links to technical data sheets that may be displayed
for viewing or printing by clicking on the "underlined" product numbers.
Please submit this form to obtain information on products that do not
have posted technical data or to obtain extra information.
|
